REP Fitness PR-5000 Power Rack
Series: REP 5000 Series. Specs copied from the manufacturer page, last checked 2026-11-18.
| Upright size | 3x3" |
|---|---|
| Hole diameter | 1" |
| Front hole spacing | 2" throughout |
| Height | 80" or 93" — Upright height options 80" and 93" |
| Footprint | Width 50.8"; depth options 16", 30" or 41" |
| Manufacturer notes | REP says this rack needs to be bolted down or fitted with its Rear Base Stabilizer, depending on depth and attachments. |
| Source | https://repfitness.com/products/pr-5000-power-rack-pre-selected https://repfitness.com/products/pr-5000-rack-builder |
Attachment fit
| Attachment | Result | Why |
|---|---|---|
| Rogue Monster Lite J-Cup Pair (Standard) | Not recommended | Pin (5/8") is much smaller than the holes (1"). Do not use without a purpose-made adapter. |
| Rogue Infinity J-Cup Set | Does not fit | Upright size differs: attachment is for 2x3" uprights, rack is 3x3". |
| REP Fitness Round Sandwich J-Cups (4000 Series) | Not recommended | Pin (5/8") is much smaller than the holes (1"). Do not use without a purpose-made adapter. |
| Titan Fitness X-3 Series J-Hooks | Unknown | Same 3x3" upright, but the manufacturer does not publish this attachment's pin diameter. Ask before buying. |
"Dimensional match" means the published numbers line up. It is not a manufacturer guarantee. REP, for example, says it "cannot guarantee compatibility with other non-REP products."